ST-XS2
วิธีการรีเซ็ต
Make sure you remove the Bluetooth profile on your device first before resetting
ขั้นตอนที่ 1
Make sure your ST-XS2 is charged before resetting then take them out of the charging case
ขั้นตอนที่ 2
Turn off your ST-XS2 by pressing and holding the control button for at least 8 seconds (The LED will turn off).
ขั้นตอนที่ 3
Press and hold the control button again for at least 15-20 seconds to make them go into pairing mode
ขั้นตอนที่ 4
Place both earbuds closely and press the touch buttons for 3 seconds, both earbuds will then be pairing to each other automatically
Your ST-XS2 is now ready to be connected to your Bluetooth device.
ขั้นตอนที่ 1
Make sure your ST-XS2 is charged before resetting then take them out of the charging case
ขั้นตอนที่ 2
Turn off your ST-XS2 by pressing and holding the control button for at least 8 seconds (The LED will turn off).
ขั้นตอนที่ 3
Press and hold the control button again for at least 15-20 seconds to make them go into pairing mode
ขั้นตอนที่ 4
Place both earbuds closely and press the touch buttons for 3 seconds, both earbuds will then be pairing to each other automatically
Your ST-XS2 is now ready to be connected to your Bluetooth device.
